Gigabit lan solution, Serial ata ii technology, Built-in sata raid solution – Asus P5MT-C User Manual
Page 17: Usb 2.0 technology, Temperature, fan, and voltage monitoring
ASUS P5MT-C
1-3
Gigabit LAN solution
The motherboard comes with dual Gigabit LAN controllers and ports to
provide a total solution for your networking needs. The onboard Broadcom
®
BCM5753 Gigabit LAN controllers use the PCI Express interface and could
achieve network throughput close to Gigabit bandwidth. See page 2-23 for
details.
Serial ATA II technology
The motherboard supports the Serial ATA II technology through the Serial
ATA interfaces controlled by the Intel
®
ICH7R. The SATA specification
allows for thinner, more flexible cables with lower pin count, reduced
voltage requirement, and up to 300 MB/s data transfer rate.
Built-in SATA RAID solution
The Intel
®
ICH7R allows RAID 0, RAID 1, RAID 0+1, and software RAID
5 configuration for SATA hard disk drives via the Intel
®
Matrix Storage
Manager or the LSI Logic Embedded SATA RAID Setup Utility (no RAID 5).
See page 2-25 and Chapter 5 for details.
USB 2.0 technology
The motherboard implements the Universal Serial Bus (USB) 2.0
specification, dramatically increasing the connection speed from the
12 Mbps bandwidth on USB 1.1 to a fast 480 Mbps on USB 2.0. USB 2.0 is
backward compatible with USB 1.1. See pages 2-23 and 2-26 for details.
Temperature, fan, and voltage monitoring
The CPU temperature is monitored by the ASIC (integrated in the Winbond
hardware monitor) to prevent overheating and damage. The system fan
rotations per minute (RPM) is monitored for timely failure detection. The
ASIC monitors the voltage levels to ensure stable supply of current for
critical components. See page 4-29 for details.