Asus WL-330g - Manual (Page 5)

5 ASUS Pocket Wireless Access Point (WL-330g)
English
LED indicators
The ASUS WL-330g comes with a Power, Wireless,
and Ethernet LED indicators. Refer to the table below
for LED indications.
LED Status Mode* Indication
Ethernet On AP/EA The device is connected to an Ethernet network.
Off AP/EA The device is off or not connected to an Ethernet
network.
Wireless On AP The device is on and ready.
On EA The device is associated with an AP or other
wireless device.
Off AP The device is off.
Off EA The device is not associated with an AP or other
wireless device.
Blinking AP/EA The device is transmitting or receiving data.
Power On AP/EA The device in on and ready.
Off AP/EA The device is off or performing boot sequence.
Blinking AP/EA Firmware upgrade failed.
USB
WL-330g
4 2 1
6
5 3
Switch
Wall
socket
After installation, check the Power and Ethernet LEDs. These LEDs light
up to indicate that the device is on and has physical connection to an
Ethernet network. Refer to the LED indications below.
*Modes: AP – Access Point mode EA – Ethernet adapter mode