Asus WL-330g - Manual (Page 4)

4 ASUS Pocket Wireless Access Point (WL-330g)
English
Device installation
Using DC power
1. Insert one end of the supplied RJ-45 cable to the WL-330g Ethernet port.
2. Insert the other end of the RJ-45 cable to a network hub, switch, router, or
wall patch Ethernet port.
3. Connect the power adapter plug to the WL-330g DC-IN socket.
4. Connect the WL-330g power adapter to a wall socket.
5. Connect the network hub, switch, or router power adapter plug to the DC-
IN socket of the device.
6. Connect the network hub, switch, or router power adapter to a wall socket.
Using USB bus power
1. Insert one end of the supplied RJ-45 cable to the WL-330g Ethernet port.
2. Insert the other end of the RJ-45 cable to the Ethernet port on your
computer, notebook, network hub, switch, router, or wall patch panel.
3. Insert one end of the supplied USB cable to the DC-IN socket of the device.
4. Insert the other end of the USB cable to any available USB port on your
computer, notebook, network hub, switch, or router.
5. Turn on your computer/notebook, or connect the network hub, switch, or
router power adapter to a wall socket.
6. Connect the power adapter of the network hub, switch, or router to a wall
socket.
5 2 1
6
4
Switch
Wall socket
WL-330g
3