Asus M4A78LT-M - Manual (Page 51)

ASUS M4A78LT-M 2-11
VDDNB Over Voltage [Auto]
Sets the VDDNB over voltage. The valid value ranges vary depending on your CPU model.
Use <+> / <-> keys to adjust the ratio. Configuration options: [Auto]
LoadLine Calibration [Auto]
Sets the LoadLine. Configuration options: [Auto] [Max.=100%] [Min.=0%]
If the system becomes unstable after changing the setting, set it back to [Auto] for safe
mode.
HT Link Frequency [Auto]
Sets the HyperTransport link speed. Configuration options: [Auto] [200MHz] [400MHz]
[600MHz] [800MHZ] [1000MHz] [1200MHz] [1400MHz] [1600MHz] [1800MHz] [2000MHz]
HT Link Width [Auto]
Sets the HyperTransport link width. Configuration options: [Auto] [8 Bit] [16 Bit]
HT Over Voltage [Auto]
Sets the HT over voltage. The values range from 1.25000V to 1.38500V with a 0.01500V
increment. Use the <+> / <-> keys to adjust the value. Configuration options: [Auto]
[Max. = 1.38500V] [Min. = 1.25000V]
Memory Clock Mode [Auto]
Sets the memory clock mode. Configuration options: [Auto] [Manual]
DRAM Timing Mode [Auto]
Sets the DRAM timing mode. Configuration options: [Auto] [DCT 0] [DCT 1] [Both]
Memory Over Voltage [Auto]
Sets the memory over voltage. The values range from 1.5000V to 2.3100V with a 0.0150V
increment. Use the <+> / <-> keys to adjust the value. Configuration options: [Auto] [Max. =
2.3100V] [Min. = 1.5000V]
Chipset Over Voltage [Auto]
Sets the chipset over voltage. The values range from 1.10000V to 1.59500V with a 0.01500V
increment. Use the <+> / <-> keys to adjust the value. Configuration options: [Auto]
[Max. = 1.59500V] [Min. = 1.10000V]
The following item only appears when you set Memory Clock Mode to [Manual].
Memclock Value [400MHz]
Selects the DRAM frequency programming method.
Configuration options: [400MHz] [533MHz] [667MHz] [800MHz]