Asus M3N78-EMH HDMI - Manual (Page 64)

2-18 Chapter 2: BIOS setup
2.3.5 IDE Configuration
The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press if you wish to
configure the item.
IDE Configuration
Onboard PCI IDE Controller [Enabled]
OnChip S-ATA Controller [Enabled]
SATA Mode select [SATA Mode]
Onboard PCI IDE Controller [Enabled]
Allows you to enable or disable the onboard PCI IDE controller.
Configuration options: [Enabled] [Disabled]
OnChip S-ATA Controller [Enabled]
Allows you to disable or set the OnChip S-ATA devices.
Configuration options: [Enabled] [Disabled]
SATA Mode select [SATA Mode]
Allows you to select the SATA Mode. Configuration options: [SATA Mode] [RAID
Mode] [AHCI Mode]
The following items appears only when the SATA Mode select item is set to
[RAID Mode].
SATA1/2/3/4/5/6 [Enabled]
Allows you to disable or enable the SATA1/2/3/4/5/6.
Configuration options: [Disabled] [Enabled]
Disabled: disables
the integrated IDE
Controller.
Enabled: enable
the integrated IDE
Controller.