Asus P4P800S SE - Manual (Page 24)

1-14 Chapter 1: Product introduction
DDR400 Qualified Vendor List (QVL)
Size Vendor Model Brand DS/SS Component
256MB KINGSTON KVR400X72C25/256 Winbond SS W942508BH-5(ECC)*
512MB KINGSTON KVR400X72C25/512 Winbond DS W942508BH-5(ECC)*
256MB SAMSUNG M381L3223ETM-CCC SAMSUNG SS K4H560838E-TCCC(ECC)*
512MB SAMSUNG M381L6423ETM-CCC SAMSUNG DS K4H560838E-TCCC(ECC)*
256MB ATP AG32L72T8SQC4S SAMSUNG SS K4H560838D-TCC4(ECC)*
512MB ATP AG64L72T8SQC4S SAMSUNG DS K4H560838D-TCC4(ECC)*
256MB KINGSTON KVR400X72C3A/256 MOSEL SS V58C2256804SAT5(ECC)*
512MB KINGSTON KVR400X72C3A/512 MOSEL DS V58C2256804SAT5(ECC)*
256MB KINGMAX MPXB62D-38KT3R KINGMAX SS KDL388P4EA-50
512MB KINGMAX MPXC22D-38KT3R KINGMAX DS KDL388P4EA-50(A)
Make sure to unplug the power supply before adding or removing DIMMs or
other system components. Failure to do so may cause severe damage to both
the motherboard and the components.
Follow these steps to install a DIMM.
1. Unlock a DIMM socket by pressing
the retaining clips outward.
2. Align a DIMM on the socket such that
the notch on the DIMM matches the
break on the socket.
3. Firmly insert the DIMM into the socket
until the retaining clips snap back in
place and the DIMM is properly
seated.
Unlocked Retaining Clip
DDR DIMM notch
1.9.2 Installing a DIMM
Obtain DDR DIMMs only from ASUS qualified vendors for better system
performance. Visit the ASUS website (www.asus.com) for the latest QVL.
You can use the ECC* DIMMs listed on the QVL, however, it will work only in
unbuffered non-ECC mode because the chipset does not support ECC function.
Important notes on ECC DIMMs