Asus L1N64-SLI WS/B - Manual (Page 27)

ASUS L1N64-SLI WS/B 2-
3. Lift the load lever in the direction of
the arrow to a 135º angle.
4. Lift the load plate with your thumb
and forefinger to a 100º angle (A),
then push the PnP cap from the
load plate window to remove (B).
5. Position the CPU
over the socket,
making sure that the
gold triangle is on the
bottom-right corner
of the socket. The
socket alignment
keys should fit into
the CPU notches.
2. Press the load lever with your thumb (A), then move it to the left (B) until it is
released from the retention tab.
To prevent damage to the socket pins, do not remove the PnP cap until you are
installing a CPU.
Retention tab
Load lever
This side of
the socket box
should face
you.
PnP cap
A
B
Load plate
A
B
Gold triangle mark
Alignment keys