Asus AT5NM10-I - Manual (Page 11)

ASUS AT5NM10-I 1-2
1.2.2 Layout contents
1.2 Motherboard overview
1.2.1 Motherboard layout
Place four screws into the holes indicated by circles to secure the motherboard to the
chassis. DO NOT overtighten the screws! Doing so can damage the motherboard.
Ensure that you install the motherboard into the chassis in the correct orientation. The edge
with external ports goes to the rear part of the chassis.
Place this side towards
the rear of the chassis.
Connectors/Jumpers/Slots/LED Page Connectors/Jumpers/Slots/LED Page
1.
Keyboard/mouse power and USB device
wake-up (3-pin PS2_USBPW1-4, 3-pin USBPW5-
8)
1-10 9.
Chassis intrusion connector (4-1 pin
CHASSIS)
1-14
2. Serial port connectors (10-1 pin COM2) 1-17 10. Internal speaker connector (4-pin
SPEAKER)
1-14
3. ATX power connectors (24-pin EATXPWR, 4-pin
ATX12V)
1-12 11. Clear RTC RAM (3-pin CLRTC) 1-9
4. CPU and chassis fan connectors (3-pin
CPU_FAN, 3-pin CHA_FAN)
1-15 12. Onboard LED 1-1
5. LVDS connector (30-pin CON1) 1-16 13. Serial ATA connectors (7-pin SATA1, SATA2) 1-13
6. System panel connector (10-1 pin F_PANEL) 1-15 14. USB connector (10-1 pin USB56, USB78) 1-13
7. DIMM socket 1-3 15. Digital audio connector (4-1 pin SPDIF_OUT) 1-17
8. System panel connector (10-1 pin F_PANEL) 1-16 16. Front panel audio connector (10-1 pin AAFP) 1-15
E5179_AT5NM10-I.indb 2 12/22/09 5:55:43 PM