Asus P8H61 EVO - Manual (Page 42)

1-30 Chapter 1: Product introduction
1.12 Onboard LEDs
1. Standby Power LED
The motherboard comes with a standby power LED that lights up to indicate that the
system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should
shut down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
P8H61 EVO
SB_PWR
ON
Standby Power Powered Off
OFF
P8H61 EVO Onboard LED
2. Turbo Key II switch
This switch allows you to enable or disable the Turbo Key II function.
P8H61 EVO
P8H61 EVO Turbo Key II switch