Asus P5AD2-E Premium - Manual (Page 147)

A S U S P 5 A D 2 - E P r e m i u m A S U S P 5 A D 2 - E P r e m i u m A S U S P 5 A D 2 - E P r e m i u m A S U S P 5 A D 2 - E P r e m i u m A S U S P 5 A D 2 - E P r e m i u m 5 - 3 1 5 - 3 1 5 - 3 1 5 - 3 1 5 - 3 1
5.5.3 5.5.3 5.5.3 5.5.3 5.5.3 Intel Intel Intel Intel Intel ® ® ® ® ® RAID configurations RAID configurations RAID configurations RAID configurations RAID configurations
This motherboard supports RAID 0, RAID 1, and Intel ® Matrix Storage
configurations for Serial ATA hard disks drives through the Intel ® ICH6R
Southbridge chip.
Setting the RAID item in BIOS Setting the RAID item in BIOS Setting the RAID item in BIOS Setting the RAID item in BIOS Setting the RAID item in BIOS
You must set the RAID item in the BIOS Setup before you can create a RAID
set(s). To do this:
1. Enter the BIOS Setup during POST.
2. Go to the Main Menu Main Menu Main Menu Main Menu Main Menu, select IDE Configuration IDE Configuration IDE Configuration IDE Configuration IDE Configuration, then press .
3. Select the item C o n f i g u r e S A T A A s C o n f i g u r e S A T A A s C o n f i g u r e S A T A A s C o n f i g u r e S A T A A s C o n f i g u r e S A T A A s, then press to display
the configuration options.
4. Select R A I D R A I D R A I D R A I D R A I D from the C o n f i g u r e S A T A A s C o n f i g u r e S A T A A s C o n f i g u r e S A T A A s C o n f i g u r e S A T A A s C o n f i g u r e S A T A A s item options, then
press .
5. Select the item O n b o a r d S e r i a l - A T A B O O T R O M O n b o a r d S e r i a l - A T A B O O T R O M O n b o a r d S e r i a l - A T A B O O T R O M O n b o a r d S e r i a l - A T A B O O T R O M O n b o a r d S e r i a l - A T A B O O T R O M, press ,
then select E n a b l e d E n a b l e d E n a b l e d E n a b l e d E n a b l e d from the options.
6. Save your changes, then exit the BIOS Setup.
Refer to Chapter 4 for details on entering and navigating through the
BIOS Setup.
Intel Intel Intel Intel Intel ® ® ® ® ® Application Accelerator RAID Option ROM Utility Application Accelerator RAID Option ROM Utility Application Accelerator RAID Option ROM Utility Application Accelerator RAID Option ROM Utility Application Accelerator RAID Option ROM Utility
The Intel ® Application Accelerator RAID Option ROM utility allows you to
create RAID 0 and RAID 1 set(s) from SATA hard disk drives that are
connected to the SATA connectors supported by the motherboard
Southbridge chip.
To enter the Intel ® Application Accelerator RAID Option ROM utility:
1. Turn on the system after installing all the SATA hard disk drives.
2. During POST, press to display the utility main menu.
[ DISK/VOLUME INFORMATION ]
RAID Volumes:
None defined.
Non-RAID Disks:
Port Drive Model
Serial # Size Type/Status (Vol ID)
0 ST380013AS xxxxxxxx 74.5GB Non-RAID Disk
1 ST380013AS xxxxxxxx 74.5GB Non-RAID Disk
Intel(R) Application Accelerator RAID Option ROM v4.0.0.6211
Copyright(C) 2003-04 Intel Corporation. All Rights Reserved.
[ MAIN MENU ]
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
[ ]-Select [ ]-Select [ESC] Exit [ESC] Exit [Enter]-Select Menu [Enter]-Select Menu