3 onboard devices configuration, High definition audio [enabled, J-micron esata/pata controller [enabled – Asus P5Q SE PLUS User Manual
Page 78: Onboard pcie lan [enabled, Serial port1 address [3f8/irq4
2-26
Chapter 2: BIOS setup
2.5.3
OnBoard Devices Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
Onboard Device Configuraiton
High Definition Audio
[Enabled]
Front Panel Type
[HD Audio]
J-Micron eSATA/PATA Controller [Enabled]
Onboard PCIE LAN
[Enabled]
Onboard PCIE LAN Boot ROM
[Disabled]
Serial Port1 Address
[3F8/IRQ4]
Enable or Disable
High Definition Audio
Controller
High Definition Audio [Enabled]
Allows you to enable or disable the High Definition Audio. The following item
appears only when you enable this item. Configuration options: [Enabled]
[Disabled]
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy
AC’97 or high-definition audio depending on the audio standard that the front
panel audio module supports. Configuration options: [AC97] [HD Audio]
J-Micron eSATA/PATA Controller [Enabled]
Allows you to disable or enable the onboard JMicron
®
eSATA/PATA controller.
Configuration options: [Enabled] [Disabled]
Onboard PCIE LAN [Enabled]
Allows you to enable or disable the onboard PCIE LAN.
Configuration options: [Enabled] [Disabled]
Onboard PCIE LAN Boot ROM [Disabled]
This item appears only when you enable the previous item.
Configuration options: [Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
BIOS SETUP UTILITY
Advanced