Asus P5QPL-VM EPU - Manual (Page 55)

ASUS P5QPL-VM EPU 2-13
2.4.3 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then
press to display the submenu.
North Bridge Configuration
Memory Remap Feature [Enabled]
Allows you to enable or disable the remapping of overlapped PCI memory above the total
physical memory. Configuration options: [Enabled] [Disabled]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configuring DRAM Timing by SPD.
Configuration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the primary boot device. Configuration options: [IGD] [PCI/IGD]
[PCI/PEG] [PEG/IGD] [PEG/PCI]
IGD Graphics Mode Select [Enabled, 32MB]
Allows you to select the amount of system memory used by the IGD graphics device.
Configuration options: [Disabled] [Enabled, 32MB] [Enabled, 64MB] [Enabled, 128MB]
DVMT Memory [256MB]
Allows you to select the DVMT memory. Configuration options: [128MB] [256MB]
[Maximum DVMT]
• The [Maximum DVMT] option only appears when you install 1GB system memory or
more.
• The [256MB] option only appears when you install more than 512MB system memory.
Protect Audio Video Path Mode [Lite]
Allows you to use the High-Bandwidth Digital Content Protection (HDCP) function. This item
is not user-configurable.
Feature PAVP Lite
Compressed video buffer is encrypted Yes
HW 128-bit AES decryption Yes
Protected memory (96MB reserved during boot) No