Asus PXL-S30R - Manual (Page 24)

2-12 Chapter 2: RAID configuration
2.2.3 Managing Arrays
The LSI Logic MPT SCSI Setup Utility allows you to perform other tasks related to
configuring and maintaining IM volumes.
Refer to this section to view volume properties, manage the hot spare disk,
synchronize the array, activate the array, and delete the array.
Viewing volume properties
To view volume properties:
1. On the main menu, select RAID Properties.
2. Here you can view properties of the RAID array(s) created. If you have
configured a hot spare, it will also be listed. if you created more than one
array, you may view the next array by pressing and select
from the menu.
Esc=Abort/Exit ArrowKeys=Select Item -/+ =Change [Item]
Home/End =Select Item Enter=Execute
F2 =Menu
LSI Logic MPT SCSI Setup Utility Version MPTBIOS-IME-5.10.03
RAID Properties Array: IM SCSI ID: 8 Size(MB): 70008
SCSI Device Identifier Array Hot Status Predict Size
ID Disk? Spare Failure (MB)
8 FUJITSU MAT3073NC 0107 Yes No Primary No 70008
9 FUJITSU MAT3073NC 0107 Yes No Out of Sync No 70008
10 FUJITSU MAT3073NC 0107 --- No Ok No 70008
Esc = Abort/Exit ArrowKeys=Select Item -/+ =Change [Item]
Home/End =Select Item Enter=Execute
LSI Logic MPT SCSI Setup Utility Version MPTBIOS-IME-5.10.03
Adapters Properties
Adapter PCI Dev/
Bus Func
1020/1030 2 10
Host SCSI ID [ 7]
SCSI Bus Scan Order [Low to High (0..Max)]
Removable Media Support [None]
CHS Mapping [SCSI Plug and Play Mapping]
Spinup Delay (Secs) [ 2]
Secondary Cluster Server [No]
Termination Control [Auto]