Asus PXL-S30R - Manual (Page 11)

ASUS PXL-S30R 1-3
1.3 Card layout
The illustration below shows the major components of the SCSI RAID card.
1.4 System requirements
Before you install the PXL-S30R SCSI RAID card, check if the remote server
system meets the following requirements:
•
workstation or server motherboard with a PCI-X slot
• SCSI hard disk drives (SCSI cable within 8M)
• Supporting operating system:
Windows:
-Win2003 -FUSION-MPT Windows Server 2003 Driver
• Other requirement:
- Appropriate thermal solution
- Certified power supply module
1
2
3 4
5
6
1. Channel A 68-pin VHDCI SCSI connector
2. Channel B 68-pin VHDCI SCSI connector
3. Channel B 68-pin HD SCSI connector
4. Channel A 68-pin HD SCSI connector
5. Channel A and B activity LED connector
6. SCSI card status LED (lights up to indicate that the card is working normally)
You may connect the HDD activity LED cable to the J1 connector. When
Channel A or Channel B has data access, the LED blinks.