Asus PXL-S30R - Manual (Page 15)

ASUS PXL-S30R 2-3
2.1.3 Flashing RAID card firmware
The PXL-S30R SCSI RAID card supports RAID 0, RAID 1 and RAID 1E solution.
If you need to switch the solution, you need to flash the firmware using the support
CD that comes with the RAID card.
To flash the RAID card firmware in DOS environment:
1. Place the motherboard support CD in the optical drive.
2. Restart the computer, then enter the BIOS Setup.
3. Select the optical drive as the first boot priority to boot from the support CD.
Save your changes, then exit the BIOS Setup.
4. Restart the computer.
5. Press any key when prompted to boot from CD.
The Makedisk menu appears.
Loading FreeDOS FAT KERNEL GO!
Press any key to boot from CDROM...
A) FreeDOS command prompt
B) Make PXL-S30R RAID Card driver disk for Windows 2000
C) Make PXL-S30R RAID Card driver disk for Windows Server 2003
D) Flash PXL-S30R RAID Card BIOS and Firmware for RAID 0
E) Flash PXL-S30R RAID Card BIOS and Firmware for RAID 1
Please choose A TO E:
6. Select D) or E) to flash the RAID card BIOS and firmware for RAID 0 or
RAID 1/RAID 1E based on your needs, and press to start flashing.