Asus P2Z - Manual (Page 16)

16 ASUS P2Z User’s Manual
III. HARDWARE SETUP
Jumpers
III. H/W SETUP
5. CPU Bus Frequency Selection (FS0, FS1, FS2, FS3)
This option tells the clock generator what frequency to send to the CPU, DRAM, and
440ZX AGPset. This allows the selection of the CPU’s External frequency (or BUS
Clock). The BUS Clock multiplied by the BUS Multiple equals the CPU’s Internal
frequency (the advertised CPU speed).
P2Z CPU External Clock
(BUS) Frequency Selection
105MHz
35MHz
1 2 3
103.0MHz
34.3MHz
1 2 3
100.30MHz
33.43MHz
1 2 3
83.30MHz
41.65MHz
1 2 3
75.0MHz
37.5MHz
1 2 3
FS1
FS2
FS0
FS3
66.8MHz
33.4MHz
1 2 3
CPU
PCI
CPU
PCI 110.00MHz
36.67MHz
112.00MHz
37.33MHz
115.00MHz
38.33MHz
120MHz
40MHz
124MHz
31MHz
124.00MHz
41.33MHz
1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3
FS1
FS2
FS0
FS3
133.0MHz
33.3MHz
133.00MHz
44.33MHz
140MHz
35MHz
150.0MHz
37.5MHz
1 2 3 1 2 3 1 2 3 1 2 3
FS1
FS2
FS0
FS3
CPU
PCI
R P2Z
4. Core Voltage Setting (VCORE)
This jumper sets the core voltage supplied to the microprocessor.
R
P2Z CPU Core Voltage Setting
Normal
(Default)
1
VCORE
2
3
Test
1
2
3
P2Z
WARNING! Using a higher voltage Test may help when overclocking but may
result in the shortening of your computer component’s life. It is strongly recom-
mended that you leave both the VIO and VCORE jumpers on their default settings.