Asus F2A85-M PRO - Manual (Page 142)

5-4 Chapter 5: RAID support
Chapter 5
Creating a RAID volume
To create a RAID volume:
1. In the Main Menu, press <2> to enter the LD View / LD Define Menu function.
2.
Press + , and the following screen appears.
3. Move to the RAID Mode item and press to select a RAID mode to create.
4. Move to the Assignment item by using the down arrow key and set Y to select the
hard disk drives you want to include in the RAID set.
5. Press + to save the setting.
6. The utility prompts the following message. Press + to input the LD name.
7. Enter an LD name, and then press any key to continue.
Enter the LD name here:
8. Press + to erase the MBR, or you may press any key to abort the settings.
9. Press + to enter the screen to modify the array capacity, or press any key to
use the maximum capacity.