Asus P5P43TD/USB3 - Manual (Page 51)

ASUS P5P43TD 2-13
Ai Clock Twister [Auto]
Allows you to set the DRAM performance. Configuration options: [Auto] [Lighter] [Light]
[Moderate] [Strong] [Stronger]
Ai Transaction Booster [Auto]
Allows you to set the system performance. Configuration options: [Auto] [Manual]
The following items appear only when you set the Ai Transaction Booster item to [Manual].
C/P : A1 A2
LVL : 08 08
Common Performance Level [05]
Set this item to a higher level for better compatiility or a lower level for better
performance. Use the <+> and <-> keys to adjust the value.
Pull-In of CHA/CHB PH1/2 [Disabled]
Set this item to [Enabled] to apply enhancement on DRAM Channel A and B, Phase
1 and 2. The number of phases is determined by DRAM frequency and FSB strap.
Configuration options: [Disabled] [Enabled]
CPU Voltage [Auto]
Allows you to set the CPU voltage. Configuration options: [Auto] [+50mv] [+100mv] [+150mv]
Refer to the CPU documentatiion before setting the CPU voltage. Setting a high voltage may
damage the CPU permanently, and setting a low voltage may make the system unstable.
Auto PSI [Enabled]
Allows you to enable or disable the Auto PSI. Configuration options: [Enabled] [Disabled]
NB Voltage [Auto]
Allows you to set the North Bridge voltage. Configuration options: [Auto] [1.10V] [1.15V]
[1.20V] [1.25V]
VTT CPU Voltage [Auto]
Allows you to set the VTT CPU voltage. Configuration options: [Auto] [1.2V] [1.3V]
SB Voltage [Auto]
Allows you to set the South Bridge voltage. Configuration options: [Auto] [1.5V] [1.6V]
Memory Over Voltage [Auto]
Allows you to set the memory over voltage. The values range from 1.50000V to 2.20500V
with a 0.01500V interval. Use the <+> and <-> keys to adjust the value. Configuration options:
[Auto]
Setting a high voltage may damage the component permanently, and setting a low voltage
may make the system unstable.