beautypg.com

Asus P5P43TD/USB3 User Manual

Page 48

background image

2-10

Chapter 2: BIOS information

Ai Overclock Tuner [Auto]

Allows selection of CPU overclocking options to achieve desired CPU internal frequency.

Select either one of the preset overclocking configuration options:

Manual - Allows you to individually set overclocking parameters.

Auto - Loads the optimal settings for the system.

X.M.P. - If you install memory module(s) supporting the eXtreme Memory Profile X.M.P.)

Technology, choose this item to set the profile(s) supported by your memory

module(s) for optimizing the system performance.

The following two items appear only when you set the Ai Overclock Tuner item to

[Manual].

Front Side Bus

CPU External Frequency

FSB 1600

400 MHz

FSB 1333

333 MHz

FSB 1066

266 MHz

FSB 800

200 MHz

FSB Frequency [XXX]

Displays the frequency sent by the clock generator to the system bus and PCI bus. The

value of this item is auto-detected by the BIOS. Input the desired CPU frequency using

the numeric keypad. The values range from 200 to 800 MHz. Refer to the table below

for the correct Front Side Bus and CPU External Frequency settings.

PCIE Frequency [Auto]

Allows you to set the PCI Express frequency. Use the <+> and <-> keys to adjust the

PCIE frequency. The values range from 100 to 180.

FSB/CPU External Frequency Synchronization

The following configuration options for the following sub-item vary depending on the DIMMs

you install on the motherboard.

eXtreme Memory Profile [Disabled]

This item appears only when you set the Ai Overclock Tuner item to [X.M.P.] and

allows you to enable or disable the eXtreme Memory Profile.

Configuration options: [Disabled] [Enabled]

CPU Ratio Setting [Auto]

Allows you to set the ratio between CPU Core Clock and the FSB Frequency.

Configuration options: [Auto]

FSB Strap to North Bridge [Auto]

Allows you to adjust the FSB strap. Configuration options: [Auto] [200MHz] [266MHz]

[333MHz] [400MHz]

DRAM Frequency [Auto]

Allows you to set the DDR3 operating frequency. Configuration options: [Auto]

[DDR3-800MHz] [DDR3-1066MHz] [DDR3-*1600MHz*] [DDR3-*1800MHz*]

This manual is related to the following products: