Asus P5K Pro - Manual (Page 89)

ASUS P5K PRO 4-25
4.4.5 OnBoard Devices Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
Onboard Device Configuration
High Definition Audio [Enabled]
Front Panel Type [HD Audio]
Onboard 1394 Controller [Enabled]
Marvell IDE Controller [Enabled]
Marvell GbE LAN [Enabled]
LAN Boot ROM [Disabled]
Serial Port1 Address [3F8/IRQ4]
Enable or Disable
High Definition Audio
Controller
High Definition Audio [Enabled]
Allows you to enable or disable the High Definition Audio Controller.
Configuration options: [Enabled] [Disabled]
Front Panel Support Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy
AC’97 or high-definition audio depending on the audio standard that the front
panel audio module supports. Configuration options: [AC97] [HD Audio]
Onboard 1394 Controller [Enabled]
Allows you to disable or enable the onboard 1394 device support.
Configuration options: [Enabled] [Disabled]
Marvell IDE Controller [Enabled]
Allows you to disable or enable the Marvell IDE device support.
Configuration options: [Enabled] [Disabled]
MarvelI GbE LAN [Enabled]
Configuration options: [Enabled] [Disabled]
LAN Boot ROM [Disabled]
Configuration options: [Disabled] [Enabled]
PEG Port Force x1 [Disabled]
Configuration options: [Enabled] [Disabled]
ASUS C.G.I. Function [Auto]
Allows you to configure ASUS Cross Graphics Impeller.
Configuration options: [Auto] [Enabled] [Disabled]