beautypg.com

Asus PEB-10G/SFP PLUS/SINGLE User Manual

Page 32

background image

3-14

Chapter 3: Driver installation

or
modprobe bnx2i

To load the bnx2fc driver for BCM57712 device:
insmod bnx2fc.ko

or
modprobe bnx2fc

service bnx2fcd start

Note that the inbox kernel may have an older version of bnx2, bnx2x and cnic

driver. It is important for FCoE offload user to unload these inbox versions

before attempting to load bnx2fc driver. You can do either of these two

options:
a) Reboot the server.
b) If already loaded, unload inbox bnx2, bnx2x, cnic drivers, and load the

newly installed version from netxtreme2-foce package using ‘modprobe

• Driver upgrade (rpm -Uvh) is not supported.
• On SLES 11, change “allow_unsupported_modules” parameter value of

/etc/modprobe.d/unsupport-modules’ from 0 to 1, until bnx2fc driver is

inbox. Failing to do so will not load bnx2fc.

6. To configure the network protocol and address, refer to various Linux

documentations.

This manual is related to the following products: