Asus PEB-10G/SFP PLUS/SINGLE - Manual (Page 17)

ASUS PEB-10G/SFP+ Series 2-7
CComprehensive Configuration Management v7.2.14
Copyright (C) 2000-2012 Broadcom Corporation
All rights reserved.
IP Address : 0.0.0.0
Subnet Mask : 0.0.0.0
Default Gateway : 0.0.0.0
Primary DNS : 0.0.0.0
Secondary DNS : 0.0.0.0
iSCSI Name : iqn.1995-05.com.broadcom.iscsiboot
CHAP ID :
CHAP Secret :
Initiator Parameters
Configure Initiator IP address
[Enter]:Enter Next Menu; [↑|↓]:Next Entry; [ESC]:Quit Menu
Current Adapter:Primary, Bus=03 Device=00 Func=00, MAC=C8:60:00:22:86:B7
1st / 2nd Target Parameters
Key in the necessary parameters.
Comprehensive Configuration Management v7.2.14
Copyright (C) 2000-2012 Broadcom Corporation
All rights reserved.
Connect : Disabled
IP Address : 0.0.0.0
ICP Port : 3260
Boot LUN : 0
iSCSI Name :
CHAP ID :
CHAP Secret :
1st Target Parameters
Enable/Disable Target Establishment
[←|→][Enter][Space]:Toggle Value; [↑|↓]:Next Entry; [ESC]:Quit Menu
Current Adapter:Primary, Bus=03 Device=00 Func=00, MAC=C8:60:00:22:86:B7
Secondary Device Parameters
Key in the necessary parameters.
Comprehensive Configuration Management v7.2.14
Copyright (C) 2000-2012 Broadcom Corporation
All rights reserved.
Secondary Device : 00:00:00:00:00:00
Use Independent Target Portal : Disabled
Use Independent Target Name : Disabled
Configure Secondary Device : Invoke
Secondary Device Parameters
Select Secondary Device
[Enter]:Enter New Value; [↑|↓]:Next Entry; [ESC]:Quit Menu
Current Adapter:Primary, Bus=03 Device=00 Func=00, MAC=C8:60:00:22:86:B7
Initiator Parameters
Key in the necessary parameters.
The iSCSI Name varies depending on the iSCSI target in use.