1 device hardware configuration menu, 2 mba configuration menu, Device hardware configuration menu -3 – Asus PEB-10G/SFP PLUS/SINGLE User Manual
Page 13: Mba configuration menu -3, Dcb protocol [disabled, Option rom [enabled, Boot protocol [preboot execution environment (pxe), Configuration options: [disabled] [enabled, Configuration options: [enabled] [disabled
ASUS PEB-10G/SFP+ Series
2-3
2.1.1
Device Hardware Configuration Menu
Comprehensive Configuration Management v7.2.14
Copyright (C) 2000-2012 Broadcom Corporation
All rights reserved.
Multi-Function Mode :
SF
DCB Protocol : Disabled
Device Hardware Configuration
Configure NIC Hardware Mode (Read Only)
[Enter]:Enter Next Menu; [↑|↓]:Next Entry; [ESC]:Quit Menu
Current Adapter:Primary, Bus=03 Device=00 Func=00, MAC=C8:60:00:22:86:B7
DCB Protocol [Disabled]
Configuration options: [Disabled] [Enabled]
2.1.2
MBA Configuration Menu
Comprehensive Configuration Management v7.2.14
Copyright (C) 2000-2012 Broadcom Corporation
All rights reserved.
Option ROM :
Enabled
Boot Protocol : Preboot Execution Environment (PXE)
Boot Strap Type : Auto
Hide Setup Prompt : Disabled
Setup Key Stroke : Ctrl-S
Banner Message Timeout : 5 Seconds
Link Speed : 10Gbps
Pre-boot Wake On LAN : Disabled
VLAN Mode : Disabled
VLAN ID : 1
Boot Retry Count : 0
MBA Configuration Menu
Enable/Disable Option ROM
[←|→][Enter][Space]:Toggle Value; [↑|↓]:Next Entry; [ESC]:Quit Menu
Current Adapter:Primary, Bus=03 Device=00 Func=00, MAC=C8:60:00:22:86:B7
Option ROM [Enabled]
Configuration options: [Enabled] [Disabled]
Boot Protocol [Preboot Execution Environment (PXE)]
Configuration options: [Preboot Execution Environment (PXE)]
[Bootstrap Protocol (BOOTP)] [iSCSI] [FCoE] [None]