Asus RS520-X5/PS8 - Manual (Page 63)

ASUS RS520-X5/PS8 5-5
Phoenix Phlash16 Utility Version 1.6.1.9
Copyright (c) Phoenix Technologies Ltd., 2005
Performing the following function
Load Image File BIOS.WPH
Verify interface information
Backup system BIOS ROM
Check flash memory type(s)
Flash memory block:
Save block
Restore block ..........................
Zero out block ..........................
Erase block √√√√√√√√√√√√√√√√√√√√√√√√√.
Program block .√√√√√√√√√√√√√√√√√√√√√√√√√√
Verify block .√√√√√√√√√√√√√√√√√√√√√√√√√√
Flash programming complete
4. When the utility completes the updating process, a message appears,
informing you that the flash memory has been programmed successfully.
Phoenix Phlash16 Status
Flash memory has been successfully programmed
PRESS ANY KEY TO RESTART THE SYSTEM
If the system does not restart
TURN THE POWER OFF, THEN ON
Flash part: SST49LF008A DeviceID: 5a Mfr.ID: bf
Ready to restart the system 00:00:00 (1E)
DO NOT shut down or reset the system while updating the BIOS! Doing so can
cause system boot failure!
Phoenix Phlash16 Utility Version 1.6.1.9
Copyright (c) Phoenix Technologies Ltd., 2005
Performing the following function
Load Image File BIOS.WPH
Verify interface information
Backup system BIOS ROM
Check flash memory type(s)
Flash memory block:
Save block
Restore block
Zero out block
Erase block
Program block
Verify block
Flash programming complete
30% Read in
Identifying flash memory part type 00:00:00 (18)
The recovered BIOS may not be the latest BIOS version for this motherboard.
Visit the ASUS website (www.asus.com) to download the latest BIOS file.
5. Press the power button for more than four seconds to turn off the system.