Asus RS520-X5/PS8 - Manual (Page 124)

6-26 Chapter 6: RAID configuration
Activating an array
If an array is removed from one controller/computer or moved to another, the
array is considered inactive. When you add the array back to the system, you may
reactivate the array.
To activate the array:
1. From the Manage Array screen, select Activate Array, then press .
2. Press to activate, or to cancel.
Deleting an array
• You cannot recover lost data if you delete an array. Ensure you back up
important data before deleting an array.
• If you delete an IM (RAID 1) volume, the data is preserved on the primary disk.
To delete an array:
1. From the Manage Array screen, select Delete Array, then press .
2. Press to delete, or to cancel.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item
LSI Logic Config Utility v6.18.00.00 (2007.08.07)
Manage Array -- SAS1068
Identifier LSILOGICLogical Volume 3000
Type IME
Scan Order 0
Size(MB) 51498
Status Optimal
Manage Hot Spare
Synnchronize Array
Activate Array
Delete Array
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Manage Array -- SAS1068
Identifier LSILOGICLogical Volume 3000
Type IM
Scan Order 0
Size(MB) 34332
Status Optimal
Manage Hot Spare
Synnchronize Array
Activate Array
Delete Array