Asus RS520-X5/PS8 User Manual
Page 113
ASUS RS520-X5/PS8
6-15
6. The Create New Array screen shows the disks you can add to make up
the IM volume. Use the arrow key to select a disk, then move the cursor to
the RAID Disk column. To include this disk in the array, press <+>, <->, or
You may also specify the Hot Spare disk here. Select the disk, then move the
cursor to the Hot Spr column, then press <+>, <->, or
By default, the RAID Disk field shows No before array creation. This field is
grayed out under the following conditions:
• The disk does not meet the minimum requirements for use in a RAID array.
• The disk is not large enough to mirror existing data on the primary drive.
• The disk has been selected as the Hot Spare for the RAID array.
• The disk is already part of another array.
Esc = Exit Menu F1/Shift+1 = Help
SPACE/+/- = Select disk for array or hot spare C = Create array
LSI Logic Config Utility v
6.18.00.00 (2007.08.07)
Create New Array -- SAS1068
Array Type: IM
Array Size(MB): ------
Slot Device Identifier RAID Hot Drive Pred Size
Num
Disk Spr Status Fail (MB)
0
SEAGATE ST373454SS 0003
[NO]
[NO] ------- ---- 70007
1
SEAGATE ST373454SS 0003
[NO]
[NO] ------- ---- 70007
2
SEAGATE ST373454SS 0003
[NO]
[NO] ------- ---- 35003
3
SEAGATE ST373454SS 0003
[NO]
[NO] ------- ---- 35003