Asus TX97-N - Manual (Page 23)

ASUS TX97-N User’s Manual 23
III. INSTALLATION
(DMA Channels)
III. INST
ALLA
TION
(Connectors)
III. INST
ALLA
TION
4. Parallel Printer Connector (25-pin Female)
You can enable the parallel port and choose the IRQ through “Onboard Parallel
Port” in Chipset Features Setup of the BIOS SOFTWARE. NOTE: Serial printers
must be connected to the serial port.
Parallel (Printer) Port (25-pin Female)
5. Serial Port COM1 and COM2 Connectors (Two 9-pin Male)
The two serial ports can be used for pointing devices or other serial devices. See
“Onboard Serial Port” in Chipset Features Setup of the BIOS SOFTWARE.
COM 2 COM 1
Serial Ports (9-pin Male)
6. VGA Connector (15-pin Female)
This connector is for displaying on a standard VGA-compatible device.
VGA Monitor (15-pin Female)
7. TV Out Connectors (RCA and 4-pin Female S-Video) (optional)
These connectors are for displaying on a television using the RCA connector or
the S-Video connector.
S-Video (4-pin Female)
RCA
TV Out Connectors