Creating a raid 0 set (striped) – Asus P6T Deluxe V2 User Manual

Page 163

ASUS P6T Deluxe V2

4-47

Creating a RAID 0 set (striped)

To create a RAID 0 set:
1. From the utility main menu, select 1. Create RAID Volume and press

. The following screen appears.

2. Enter a name for the RAID 0 set and press .
3. When the RAID Level item is highlighted, press the up/down arrow key to

select RAID 0(Stripe), and then press .

4. When the Disks item is highlighted, press to select the hard disk

drives to configure as RAID. The following screen appears.

Intel(R) Matrix Storage Manager option ROM v8.0.0.1027 ICH10R wRAID5

[

CREATE VOLUME MENU

]

[

HELP

]

Enter a unique volume name that has no special characters and is

16 characters or less.

[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [Enter]-Select

Name:

RAID Level:

Disks:

Strip Size:

Capacity:

Volume0

RAID0(Stripe)
Select Disks
128KB
XXX GB

Create Volume

[

SELECT DISKS

]

[↑↓]-Previous/Next [SPACE]-SelectsDisk [ENTER]-Done

Port Drive Model Serial # Size Status

0 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk

1 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk
2 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk
3 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk

Select 2 to 6 disks to use in creating the volume.

5. Use the up/down arrow key to highlight a drive, and then press

to select. A small triangle marks the selected drive. Press after

completing your selection.