Asus P6T Deluxe V2 - Manual (Page 112)

3-42 Chapter 3: BIOS setup
3.8.3 ASUS O.C. Profile
This item allows you to store or load multiple BIOS settings.
Add Your CMOS Profile.
Allows you to save the current BIOS file to the BIOS Flash. In the Name sub-item,
type your profile name and press , and then choose a profile number to
save your CMOS settings in the Save To sub-item. You can save two (2) CMOS
profiles.
Load CMOS Profile.
Allows you to load the previous BIOS settings saved in the BIOS Flash. Press
, and choose a profile to load.
Start O.C. Profile
Allows you to run the utility to save and load CMOS. Press to run the
utility.
ASUSTek O.C. Profile Utility V1.30
Current CMOS Restore CMOS
A:
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
PATH: A:\
BOARD: P6T Deluxe V2
VER: 0309
DATE: 09/15/2008
BOARD: Unknown
VER: Unknown
DATE: Unknown
• This function can support devices such as a USB flash disk or a floppy disk
with FAT 32/16 format and single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent
the system boot failure!
BIOS SETUP UTILITY
Tools
O.C. PROFILE Configuration
O.C. Profile 1 Status : Default-Profile
O.C. Profile 2 Status : Default-Profile
Add Your CMOS Profile.
Name : [Default-Profile]
Save To : [Uninstalled]
Load CMOS Profile.
Load From : [Blank]
Start O.C. Profile
Save BIOS settings
to Profile 1