Asus P7H55-M PLUS User Manual
Page 39
ASUS P7H55-M LE Series
2-13
JMB368 IDE [Enabled]
Allows you to enable or disable the JMB368 IDE Controller.
Configuration options: [Disabled] [Enabled]
This item appears only on P7H55-M LE.
Onboard LAN [Enabled]
Allows you to enable or disable the onboard LAN controller.
Configuration options: [Enabled] [Disabled]
Onboard LAN Boot ROM [Disabled]
Allows you to enable or disable the boot ROM in the onboard LAN controller. This item
appears only when the Onboard LAN item is set to [Enabled]. Configuration options:
[Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
The following items appear only on P7H55-M LE.
Serial Port2 Address [2F8/IRQ3]
Allows you to select the Serial Port2 base address.
Configuration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses. Configuration options: [Disabled] [378]
[278]
Parallel Port Mode [ECP]
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [EPP] [ECP] [EPP+ECP]
ECP Mode DMA Channel [DMA3]
Appears only when the Parallel Port Mode item is set to [ECP] or [EPP+ECP]. This
item allows you to set the Parallel Port ECP DMA. Configuration options: [DMA0]
[DMA1] [DMA3]
EPP Version [1.9]
Appears only when the Parallel Port Mode item is set to [EPP] or [EPP+ECP]. This
item allows you to select the EPP version. Configuration options: [1.9] [1.7]
Parallel Port IRQ [IRQ7]
Allows you to select parallel port IRQ. Configuration options: [IRQ5] [IRQ7]