Asus SABERTOOTH 990FX/GEN3 R2.0 - Manual (Page 88)

3-18 Chapter 3: BIOS setup
Chapter 3
Main Ai Tweaker Advanced Monitor Boot Tool
Exit
Enabled/Disabled the generation of ACPI
_PPC, _PSS, and _PCT objects.
Back Advanced\ CPU Configuration >
UEFI BIOS Utility - Advanced Mode
CPU Configuration
Socket0: AMD Phenom (tm) II X4 965 Processor
Quad Core Running @ 3715 MHz 1400 mV
Max Speed: 3400 MHZ Intended Speed: 3400 MHZ
Microcode Patch Level: 10000c6
------------ Cache per Core ------------
L1 Instruction Cache: 64 KB/2-way
L1 Data Cache: 64 KB/2-way
L2 Cache: 512 KB/16-way
Total L3 Cache per Socket: 6 MB/48-way
Cool ‘n’ Quiet Enabled
C1E Enabled
SVM Enabled
Cool‘n’Quiet [Disabled]
[Enabled] Enables the AMD Cool’n’Quiet function.
[Disabled] Disables the function.
C1E [Disabled]
[Enabled] Enables the system to utilize the AMD specific ACPI states to save power
consumption.
[Disabled] Disables the function.
SVM [Enabled]
[Enabled] Enables the AMD Security and Virtual Machine (SVM) architecture. This
design allows you to run multiple operating systems on the same physical
hardware by decoupling the operating system and physical hardware with
the hypervisor layer.
[Disabled] Disables the function.
Core C6 State [Enabled]
[Enabled] Enables the Core C6 state. This feature will help reduce the power
consumed by the CPU.
[Disabled] Disables the function.
HPC [Enabled]
[Enabled] Enables the High Performance Computing Mode.
[Disabled] Disables the function.
Apm Master Mode [Auto]
[Auto] Automatically sets the application power management mode depending on
the detected system power requirement.
[Enabled] Enables the application power management mode.
[Disabled] Disables the feature.