Asus C8HM70-I/HDMI - Manual (Page 23)

ASUS C8HM70-I Series 1-13
6. Serial ATA 3.0Gb/s connectors (7-pin SATA3G [blue])
This connector connects to Serial ATA 3.0 Gb/s hard disk drive or optical drive via
Serial ATA 3.0 Gb/s signal cables.
• You must install Windows ® XP Service Pack 3 or later version before using Serial ATA
hard disk drives.
• To configure the default SATA type in BIOS, click Advanced Mode > Advanced tab >
SATA Configuration > SATA Mode Selection.
• When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to
[AHCI]. See section 2.5.3 SATA Configuration for details.
C8HM70-I/HDMI SATA 3.0Gb/s connector
GND RSATA_RXP1 RSATA_RXN1 RSATA_TXN1 RSATA_TXP1 GND GND
SATA3G_1
C8HM70-I/HDMI
7. Serial ATA 6.0Gb/s connectors (7-pin SATA6G [gray])
This connector connects to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s
signal cables.
• You must install Windows ® XP Service Pack 3 or later version before using Serial ATA
hard disk drives.
• When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to
[AHCI]. See section 2.5.3 SATA Configuration for details.
C8HM70-I/HDMI SATA 6.0Gb/s connector
SATA6G_1
GND
RSATA_TXP1 RSATA_TXN1
GND
RSATA_RXN1 RSATA_RXP1
GND
C8HM70-I/HDMI