Hardware setup, Asus tusi-m user’s manual 33 – Asus TUSI-M User Manual
Page 33
ASUS TUSI-M User’s Manual
33
3. HARDWARE SETUP
Connectors
3. H/W SETUP
16) USB Headers (10-1 pin USB1, 5-1 pin USB2) ( LAN model only )
If the USB Ports on the back panels are inadequate, two USB headers are
available for three additional USB ports. Connect an optional 3-port USB
connector set to these headers and mount it to an open slot on your chassis.
TUSI-M
®
01
TUSI-M USB Headers
USB2
USB Power
USBP4-
USBP4+
GND
USB1
1
5
6
10
1: USB Power
2: USBP2–
3: USBP2+
4: GND
5: NC
6: USB Power
7: USBP3–
8: USBP3+
9: GND
17) Internal Audio Connectors (4-pin CD1, AUX, MODEM)
(on audio model only)
These connectors allow you to receive stereo audio input from such sound sources
as a CD-ROM, TV tuner, or MPEG card. The MODEM connector allows the
onboard audio to interface with a voice modem card with a similar connector. It
also allows the sharing of mono_in (such as a phone) and mono_out (such as a
speaker) between the onboard audio and a voice modem card.
TUSI-M
®
01
TUSI-M Internal Audio Connectors
CD In (Black)
Left A
udio
Channel
Right A
udio Channel
Ground
AUX In (White)
Left A
udio
Channel
Right A
udio
Channel
Ground
MODEM
Modem-Out
Ground
Modem-In