Asus P5GD2-X - Manual (Page 70)

2 - 2 4 2 - 2 4 2 - 2 4 2 - 2 4 2 - 2 4 C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
Adjacent Cache Line Prefetch [Enabled] Adjacent Cache Line Prefetch [Enabled] Adjacent Cache Line Prefetch [Enabled] Adjacent Cache Line Prefetch [Enabled] Adjacent Cache Line Prefetch [Enabled]
Enables or disables the Adjacent Cache Line Prefetch feature.
Configuration options: [Disabled] [Enabled]
CPU Internal Thermal Control [Auto] CPU Internal Thermal Control [Auto] CPU Internal Thermal Control [Auto] CPU Internal Thermal Control [Auto] CPU Internal Thermal Control [Auto]
Disables or sets the CPU internal thermal control.
Configuration options: [Disabled] [Auto]
Hyper-Threading Technology [Enabled] Hyper-Threading Technology [Enabled] Hyper-Threading Technology [Enabled] Hyper-Threading Technology [Enabled] Hyper-Threading Technology [Enabled]
Allows you to enable or disable the processor Hyper-Threading Technology.
Configuration options: [Disabled] [Enabled]
The following item appears only when you installed an Intel ® Pentium ® 4
CPU that supports the Enhanced Intel SpeedStep ® Technology (EIST).
Intel(R) SpeedStep Technology [Automatic] Intel(R) SpeedStep Technology [Automatic] Intel(R) SpeedStep Technology [Automatic] Intel(R) SpeedStep Technology [Automatic] Intel(R) SpeedStep Technology [Automatic]
Allows you to use the Enhanced Intel ® SpeedStep ® Technology. When set
to [Automatic], you can adjust the system power settings in the operating
system to use the EIST feature.
Set this item to [Maximum] or [Disabled] if you do not want to use the EIST.
The CPU constantly operates at a lower internal frequency when you set
this item to [Minimum].
Configuration options: [Maximum] [Minimum] [Automatic] [Disabled]
2.4.5 2.4.5 2.4.5 2.4.5 2.4.5 Chipset Chipset Chipset Chipset Chipset
The Chipset menu allows you to change the advanced chipset settings.
Select an item then press to display the sub-menu.
Select Screen
Select Item
+-
Change Option
Advanced Chipset Settings
Configure DRAM Timing by SPD [Enabled]
Hyper Path 2 [Auto]
Booting Graphic Adapter Priori [PCI Express/PCI]
PEG Buffer Length [Auto]
Link Latency [Auto]
PEG Link Mode [Auto]
PEG Root Control [Auto]
Slot Power [Auto]
• Refer to the Appendix for details on how to use the EIST feature.
• The motherboard comes with a BIOS file that supports EIST.