Asus M3A78 Pro - Manual (Page 77)

ASUS M3A78 PRO 2-25
Internal Graphics Configuration
This menu allows you to change the onboard graphics configuration settings.
Select an item then press to display the sub-menu.
UMA Frame Buffer Size [Auto]
Configuration options: [Auto] [32MB] [64MB] [128MB] [256MB] [512MB]
GFX Engine Clock Override [Disable]
Allows you to enable or disable the GFX Engine Clock Override support.
Configuration options: [Disable] [Enable]
GFX Engine Clock [500]
This item appears only when you enable the GFX Engine Clock Override item.
Use the <+> and <-> keys to change the value or type the desired value using the
numeric keypad. The values range from 150 to 1500.
Surround View [Disabled]
If you set the PCI Express device as the primary display and enable this item, you
may use the internal graphics as the secondary display.
Configuration options: [Disabled] [Enable]
NB Azalia [Enable]
Enables or disables the Northbridge Azalia support.
Configuration options: [Disabled] [Enable]
Advanced
Internal Graphics Configuration
UMA Frame Buffer Size [Auto]
GFX Engine Clock Override [Disable]
Surround View [Disabled]
NB Azalia [Enable]
Options
Auto
32MB
64MB
128MB
256MB
512MB
2.4.5 ECC Configuration
BIOS SETUP UTILITY
Advanced
ECC Configuration
ECC Mode [Disabled]
DRAM ECC Enable [Disabled]
DRAM SCRUB REDIRECT [Disabled]
4-Bit ECC Mode [Disabled]
DRAM BG Scrub [Disabled]
Data Cache BG Scrub [Disabled]
L2 Cache BG Scrub [Disabled]
L3 Cache BG Scrub [Disabled]
Set the level of ECC
protection. Note: The
‘Super’ ECC mode
dynamically sets the
DRAM scrub rate so
all of memory is
scrubbed in 8 hours.