5 connecting the intel® asrk module (optional), Connecting the intel, Asrk module (optional) -26 – Asus RS720-E7/RS12 User Manual
Page 46: 5 connecting the intel, Asrk module (optional)
Chapter 2: Hardware setup
2-26
2.8.5
Connecting the Intel
®
ASRK Module (Optional)
Follow the steps below to connect the ASRK Module to the connector on your
motherboard.
1. Locate the ASRK connector on the
motherboard.
2. Connect the ASRK module to the
connector.
Changing the module for different RAID settings:
1. Power off the system ,unplug AC cable and disengage the original module.
2. Plug AC cable and reboot the system to enter OS.
3. After the system successfully enters the OS, power off and unplug AC cable
again.
4. Put the intended module in place, then plug AC cable and reboot the
system.
5. The system will automatically detect the different RAID settings.
For detail of Intel
®
Rapid Storage Technology enterprise utility, please refer to
Chapter 5 RAID Configuration.