Asus RS720-E7/RS12 - Manual (Page 162)

7-8 Chapter 7: Driver installation
5. When asked if you will load additional RAID controller drivers, select No, then
press .
More Driver Disks?
Do you wish to load any more
driver disks?
Yes No
6. Follow the onscreen instructions to finish the OS installation.
7. When the installation is completed, DO NOT click Reboot. Press
+ + to switch to the command-line interface from graphic user
interface.
8. Type the following commands when using a Legacy floppy.
mkdir /mnt/driver
mount /dev/fd0 /mnt/driver
cd /mnt/driver
sh replace_ahci.sh
reboot