beautypg.com

3 initializing the virtual drives, Initializing the virtual drives -12, Using the initialize command – Asus RS720-E7/RS12 User Manual

Page 126

background image

6-12

Chapter 6: RAID configuration

6.2.3

Initializing the virtual drives

After creating the RAID set(s), you must initialize the virtual drives. You may

initialize the virtual drives of a RAID set(s) using the Initialize or Objects command

on the Management Menu.

Using the Initialize command

To initialize the virtual drive using the Initialize command
1. From the Management Menu, select Initialize, and then press .

2. The screen displays the available RAID set(s) and prompts you to select the

virtual drive to initialize. Use the arrow keys to select the virtual drive from the

Virtual Drive selection, and then press .

Management Menu

Configure

Initialize

Objects

Rebuild

Check Consistency

Initialize VD(s)

LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010

BIOS Version A.10.09231523R

Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option

Management Menu

Configure

Initialize

Objects

Rebuild

Check Consistency

Select VD

Virtual Drive(s) Configured

LD RAID Size #Stripes StripSz Status

0 1 148.580GB 2 64 KB ONLINE

Virtual Drives

Virtual Drive 0

LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010

BIOS Version A.10.09231523R

SPACE-(De)Select, F10-Initialize

This manual is related to the following products: