Asus RS720-E7/RS12 - Manual (Page 38)

Chapter 2: Hardware setup 2-18
2.6 Cable connections
Pre-connected system cables
1. 24-pin SSI power connector (from power supply to motherboard)
2. 8-pin SSI power connector (from power supply to motherboard)
3. Power supply SMBus connector (from power supply to motherboard)
4. System fan connectors (from motherboard FRNT_FAN1, CPU_FAN1
FRNT_FAN2, FRNT_FAN3, CPU_FAN2, and FRNT_FAN4 to system fans)
5. USB connector (from motherboard to front I/O board)
6. Panel connector (from motherboard to front I/O board)
7. PSAS (PIKE) connectors (from motherboard to SATA/SAS backplane board)
8. ISAS (SCU) connectors (from motherboard to SATA/SAS backplane board)
9. Auxiliary panel connector (from motherboard to front I/O board)
• The bundled system cables are pre-connected before shipment. You do
not need to disconnect these cables unless you will remove pre-installed
components to install additional devices.
• Refer to Chapter 4 for detailed information on the connectors.
ERR_CPU2
ERR_CPU1
ERR_DIMMC2 ERR_DIMMD1 ERR_DIMMC1 ERR_DIMMD2
ERR_DIMMB2 ERR_DIMMB1 ERR_DIMMA2 ERR_DIMMA1
ERR_DIMMH2 ERR_DIMMH1 ERR_DIMMG2 ERR_DIMMG1
ERR_DIMME1
ERR_DIMME2 ERR_DIMMF1 ERR_DIMMF2
BMC_LED
9
8
7
6
5
4
3
2
2
1
4
4
4
4
4
5