Asus P8H67 - Manual (Page 63)

Chapter 2: BIOS information 2-15
Long duration power limit [Auto]
Use <+>/<-> to adjust the value.
Long duration maintained [Auto]
Use <+>/<-> to adjust the value.
Short duration power limit [Auto]
Use <+>/<-> to adjust the value.
Power Limit Control [Disabled]
Allows you to enable or disable the power limit control function.
Configuration options: [Disabled] [Enabled]
The following two items appear only when you set the Power Limit Control item to
[Enabled].
Power Limit [Auto]
Use <+>/<-> to adjust the value.
Power Limit Time [10]
Use <+>/<-> to adjust the value.
Primary Plane Current Limit [Auto]
Use <+>/<-> to adjust the value.
Secondary Plane Current Limit [Auto]
Use <+>/<-> to adjust the value.
Some of the following items are adjusted by typing the desired values using the numeric
keypad and press . You can also use the <+> and <-> keys to adjust the value. To
restore the default setting, type [auto] using the keyboard and press .
2.4.7 CPU Offset Mode Sign [+]
[+] To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
CPU Voltage [Auto]
Allows you to set the Offset voltage. The values range from -0.635V to +0.635V with a
0.005V interval.
Refer to the CPU documentation before setting the CPU voltage. Setting a high voltage
may damage the CPU permanently, and setting a low voltage may make the system
unstable.
2.4.8 DRAM Voltage [Auto]
Allows you to set the DRAM voltage. The values range from 1.185V to 2.135V with a 0.005V
interval.
According to Intel CPU specification, DIMMs with voltage requirement over 1.65V may
damage the CPU permanently. We recommend you install the DIMMs with the voltage
requirement below 1.65V.