Asus T2-R - Manual (Page 19)

19 ASUS Terminator 2 barebone system
3. Pull the cover slightly toward
the rear panel until the side tabs
are disengaged from the
chassis.
4. Lift the cover, then set aside.
2. Use a Phillips (cross) screw
driver to remove the cover
screws. Keep the screws for
later use.
2.3 Removing the cover
To remove the cover:
1. On the rear panel, locate the
three screws that secure the
cover to the chassis.
1 1
1
2
2
4
3
2
3