Asus P8Z77-V LX2 - Manual (Page 127)

ASUS P8Z77-V LX2 5-5
Chapter 5
5. Use the up/down arrow key to select a drive, and then press to select. A small
triangle marks the selected drive. Press after completing your selection.
6. Use the up/down arrow key to select the stripe size for the RAID array (for RAID 0, 10
and 5 only),and then press . The available stripe size values range from 4KB
to 128KB. The following are typical values:
•
RAID 0: 128KB
• RAID 10: 64KB
• RAID 5: 64KB
We recommend a lower stripe size for server systems, and a higher stripe size for
multimedia computer systems used mainly for audio and video editing.
7. When the Capacity item is selected, enter the RAID volume capacity that you want
and press . The default value indicates the maximum allowed capacity.
8. When the Create Volume item is selected, press . The following warning
message appears:
9. Press to create the RAID volume and return to the main menu, or to go back
to the CREATE VOLUME menu.
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):