Asus WL-320gE - Manual (Page 36)

3. Software
36 ASUS 802.11g Access Point
Chapter 3 - Software Configuration
Access Point
3.8 IP Config
Click this item on the menu to reveal a submenu. Follow the
instructions to set up the ASUS 802.11g AP. Tips are given
when you move your cursor over each item.
LAN
Get IP Automatically
Select Yes (default) or No to get IP address automatically from a DHCP server.
Yes
This parameter determines if the ASUS 802.11g AP will send out a DHCP request
during bootup. If you have a DHCP server on the network, set this option so that
the ASUS 802.11g AP can receive an automatic IP address assignment.
If you have a DHCP (Dynamic Host Configuration Protocol) server on the network, then
the DHCP server will automatically assign the ASUS 802.11g AP an IP address when
the ASUS 802.11g AP is powered up. To determine what IP address has been assigned
to the ASUS 802.11g AP, review the IP address on the “Status” page available on the
“Main Menu”.
No
The ASUS 802.11g AP also accepts a static IP address. You may manually
configure the IP address and subnet mask on the “IP Config” page. Enter an IP
address and a subnet mask in the field provided to assign the ASUS 802.11g AP
a static IP address. If you do not know your Gateway setting, leave the field blank
(not 0.0.0.0).
Yes (no info required)
No (need to input information)
Click Apply or Finish if you make any
changes.