Asus WL-320gE - Manual (Page 31)

3. Software
ASUS 802.11g Access Point 31
Chapter 3 - Software Configuration
Access Point
Wireless bridge (also known as Wireless Distribution System or WDS) allows you
to connect to one or many Access Points.
Access Point
AP Mode configures the ASUS 802.11g AP for a specific purpose. By default, the
ASUS 802.11g AP is set to serve as an “Access Point” where a wireless mobile
client can connect wirelessly to a wired Ethernet network.
WDS Only
With WDS, the ASUS 802.11g AP can only communicate with other Access Points.
Hybrid
Hybrid allows you to use the ASUS 802.11g AP both as an access point and as a
wireless bridge.
Channel
Both Access Points in Wireless Bridge mode must be set to the same channel.
Connect to APs in Remote Bridge List (Yes/No)
Select Yes to connect to access points in the remote bridge list.
Allow anonymous? (Yes/No)
Select Yes to allow users without accounts to connect.
Note: If “Connect to APs in Remote Bridge List” and “Allow Anonymous” are both set to “No”, it
means that this AP will not connect with other APs and therefore the AP mode setting will return to
“AP Only”.