beautypg.com

6 cpu voltage [auto, 7 igpu offset voltage [auto, 8 dram voltage [auto – Asus P8H77-I User Manual

Page 57: Cpu voltage [auto] -15, Igpu offset voltage [auto] -15, Dram voltage [auto] -15

background image

2-15

ASUS P8H77-I

The following three items appear only when you set both the Enhanced Intel SpeedStep

Technology and Turbo Mode items to [Enabled].

Long duration power limit [Auto]

The default setting of this item will be TDP (65W or 95W for different CPUs). For Sandy

Bridge, Turbo Ratio can be kept a time duration exceed TDP for maximum performance. Any

under 255 can be programmed. Use the <+> and <-> keys to adjust the value.

Long duration maintained [Auto]

This value can vary from 1 to 32, which indicates the time window for Turbo Ratio over TDP

should be maintained. Use the <+> and <-> keys to adjust the value.

Short duration power limit [Auto]

This is the second power limit to provide rapid protection when package power exceeds

Power Limit 1. Default setting is 1.25 times Power Limit 1. For Intel recommend, platform

must be capable of supporting over Power Limit 2 for up to 10 msec. ASUS board can

support over Power Limit 2 for a long duration. Use the <+> and <-> keys to adjust the value.

Primary Plane Current Limit [Auto]

Maximum instantaneous current allowed at any given time for CPU cores. The value is

represented in 1/8 A (0.125A) increment. Use the <+> and <-> keys to adjust the value.

Secondary Plane Current Limit [Auto]

Maximum instantaneous current allowed at any given time for internal graphics cores. The

value is represented in 1/8 A (0.125A) increment. Use the <+> and <-> keys to adjust the

value.

Some of the following items are adjusted by typing the desired values using the numeric

keypad and press . You can also use the <+> and <-> keys to adjust the value. To

restore the default setting, type [auto] using the keyboard and press .

2.4.6

CPU Voltage [Auto]

Allows you to set the CPU voltage. Configuration options: [Auto] [+0.05V] [+0.10V] [+0.15V].

2.4.7

iGPU Offset Voltage [Auto]

Allows you to set the iGPU Offset voltage. The value ranges from 0.005V to 0.635V with a

0.005V interval.

2.4.8

DRAM Voltage [Auto]

Allows you to set the DRAM voltage. The values range from 1.185V to 2.135V with a 0.005V

interval.

According to Intel CPU spec, DIMMs with voltage requirement over 1.65V may damage

the CPU permanently. We recommend you install the DIMMs with the voltage requirement

below 1.65V.