beautypg.com

3 chipset, 4 onboard devices configuration, Chipset -10 – Asus M2A74-AM SE User Manual

Page 34: Onboard devices configuration -10

background image

2-10

ASUS M2A74-AM SE

C1E Configuration [Disabled]

Allows you to enable or disable C1E Dual-Core related CPU power State.

Configuration options: [Disabled] [Auto]

2.4.3

Chipset

The Chipset menu allows you to change the advanced chipset settings. Select an item then

press to display the sub-menu.

NorthBridge Configuration
Memory Configuration

Bank Interleaving [Auto]

Allows you to enable the bank memory interleaving.

Configuration options: [Disabled] [Auto]

Channel Interleaving [Disabled]

Allows you to enable the channel memory interleaving.

Configuration options: [Disabled] [Address bits 6] [Address bits 12]

[XOR of Address bits [20:16, 6]] [XOR of Address bits [20:16, 9]]

Enable Clock to All DIMMs [Disabled]

Enables or disables clock to all DIMMs. Configuration options: [Disabled] [Enabled]

MemClk Tristate C3/ATLVID [Disabled]

Enables or disables the MemClk Tristate C3/ALTVID.

Configuration options: [Disabled] [Enabled]

Memory Hole Remapping [Enabled]

Enables or disables the memory remapping around memory hole.

Configuration options: [Disabled] [Enabled]

DCT Unganged Mode [Auto]

Allows you to enable or disable Unganed mode.

Configuration options: [Auto] [Always]

Power Down Enable [Enabled]

Enables or disables the DDR power down mode.

Configuration options: [Disabled] [Enabled]

ECC Configuration

ECC Mode [Disabled]

Enables or disables the DRAM ECC that allows the hardware to report and correct

memory errors automatically. Configuration options: [Disabled] [Basic] [Good] [Super]

[Max] [User]

Internal Graphics
Primary Video Controller [PCIE/IGFX/PCI]

Allows you to set the primary video controller.

Configuration options: [PCIE/IGFX/PCI] [PCI/PCIE/IGFX] [IGFX/PCIE/PCI]

UMA Frame Buffer Size [Auto]

Configuration options: [Auto] [32MB] [64MB] [128MB] [256MB]

2.4.4

Onboard Devices Configuration

Serial Port1 Address [3F8/IRQ4]

Allows you to select the Serial Port1 base address.

Configuration options: [Disabled] [3F8/IRQ4][2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]