Asus TX97 - Manual (Page 28)

28 ASUS TX97 User’s Manual
III. INSTALLATION
(Connectors)
III. INST
ALLA
TION
9. AT Power Connector (12-pin block)
This connector connects to a standard 5 Volt power supply. To connect the leads
from the power supply, ensure first that the power supply is not plugged. Most
power supplies provide two plugs (P8 and P9), each containing six wires, two of
which are black. Orient the connectors so that the black wires are together.
R
Power Connector
Power Plugs from
Power Supply
P9 P8
ORG RED YL
W
BLU BLK BLK BLK BLK WHT RED RED RED
Power Connector
on Motherboard
PG +12V GND
-5V -12V +5V
+5V
Using a slight angle, align the plastic guide pins on the lead to their receptacles
on the connector. Once aligned, press the lead onto the connector until the lead
locks into place.
AT Power Connector with ATX Power Supply
For ATX Power Switch, Soft Power Switch, and remote power on functions, an
ATX power supply and ATX to AT power connector adapter are required. The
ATX to AT power connector adapter will allow an ATX power supply to be used
on this AT motherboard with additional ATX signals connected to this lead. The
ATX power switch button will be connected to the System Panel Connectors.
For ATX soft power features
on this AT motherboard, you
need an ATX power supply,
optional ATX to AT power
connector adapter, and a
momentary switch button.
+5V Standby (Vlt)
Power On (Grn)
Ground (Blk)
ATX Power Switch Lead
PWRATX
R
Optional ATX to AT Power
Connector Adapter
To ATX Power Supply
To AT Power Connector To PWRATX
P9 P8