beautypg.com

6 onboard devices configuration, 7 apm – Asus H61M-E User Manual

Page 60

background image

2-20

Chapter 2: Getting started

2.5.6

Onboard Devices Configuration

HD Audio Controller [Enabled]

[Enabled]

Enables the High Definition Audio Controller.

[Disabled]

Disables the controller.

The following item appears only when you set the HD Audio Controller item to [Enabled].

Front Panel Type [HD]

Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high-

definition audio depending on the audio standard that the front panel audio module supports.
[HD]

Sets the front panel audio connector (AAFP) mode to high definition audio.

[AC97]

Sets the front panel audio connector (AAFP) mode to legacy AC’97

Realtek LAN Controller [Enabled]

[Enabled]

Enables the Realtek LAN controller.

[Disabled]

Disables the controller.

Realtek PXE OPROM [Disabled]

This item appears only when you set the previous item to [Enabled] and allows you to

enable or disable the PXE OptionRom of the Realtek LAN controller. Configuration options:

[Enabled] [Disabled]

2.5.7

APM

Restore AC Power Loss [Power Off]

[Power On]

The system goes into on state after an AC power loss.

[Power Off]

The system goes into off state after an AC power loss.

[Last State]

The system goes into either off or on state, whatever the system state was

before the AC power loss.

Power On By PS/2 Keyboard [Disabled]

[Disabled]

Disables the Power On by a PS/2 keyboard.

[Space Bar]

Sets the Space Bar on the PS/2 keyboard to turn on the system.

[Ctrl-Esc]

Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system.

[Power Key]

Sets Power key on the PS/2 keyboard to turn on the system. This feature

requires an ATX power supply that provides at least 1A on the +5VSB lead.

Power On By PS/2 Mouse [Disabled]

[Disabled]

Disables the Power On by a PS/2 mouse.

[Enabled]

Enables the Power On by a PS/2 mouse. This feature requires an ATX

power supply that provides at least 1A on the +5VSB lead.

Power On By PCIE [Disabled]

[Disabled]

Disables the PCIE devices to generate a wake event.

[Enabled]

Enables the PCIE devices to generate a wake event.