Asus M2N-XE - Manual (Page 65)

ASUS M2N-XE 2-23
Bank Interleaving [Disabled]
Allows you to enable or disable the Bank Memory Interleaving.
Configuration options: [Disabled] [Auto]
Channel Interleaving [Auto]
Allows you to enable or disable channel memory interleaving.
Configuration options: [Disabled] [Auto] [Reserved] [Reserved] [Reserved]
Enable Clock to All DIMMs [Disabled]
Allows you to enable or disable the Unused Clocks to DIMMs Even Memory
Slots are not populated. Configuration options: [Disabled] [Enabled]
MemCLK Tristate C3/ATLVID [Disabled]
Allows you to enable or disable the MemCLK Tri-Stating during C3 and Alt VID.
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Allows you to enable or disable the Memory Remapping Around Memory
Hole.Configuration options: [Disabled] [Enabled]
Power Down Enable [Enabled]
Allows you to enable or disable DDR power down mode.
Configuration options: [Enabled] [Disabled]
Power Down Mode [Channel]
Allows you to set the DDR power down mode.
Configuration options: [Channel] [Chip Select]
Memory Configuration
Memory Configuration
Bank Interleaving [Disabled]
Channel Interleaving [Auto]
Enable Clock to ALL DIMMs [Disabled]
MemCLK Tristate C3/ATLVID [Disabled]
Memory Hole Remapping [Enabled]
Power Down Enable [Enabled]
Power Down Mode [Channel]
Enable Bank Memory
Interleaving
The following item appears only when the Power Down Enable item is set to
[Enabled].