Asus P4B-LS - Manual (Page 39)

ASUS P4B-LS motherboard user guide 2-17
2.7 Switches and jumpers
The motherboard frequency is adjusted through the DIP switches. The
white block represents the switch position. The illustration below shows all
the switches in the OFF position.
Figure 2-21 DIP Switches
The JEN jumper is set in conjunction with the DIP switches. In
JumperFree mode, set all the DIP switches to OFF.
1. JumperFree™ mode (JEN)
This jumper allows you to enable or disable the JumperFree™ mode.
The JumperFree mode allows you to change CPU settings through the
BIOS setup instead of using the DIP switches.
Figure 2-22 JumperFree Mode Setting
The JEN jumper must be set to pins 1-2 (jumper mode) if you wish to
use the DIP switches. Otherwise, setting the switches does not
produce any effect.
P4B-LS
®
P4B-LS DIP Switches
ON 123456789
1
0
SWITCH
1. Frequency Multiple
2. Frequency Multiple
3. Frequency Multiple
4. Frequency Multiple
5. Frequency Selection
6. Frequency Selection
7. Frequency Selection
8. Frequency Selection
9. Frequency Selection
10. Reserved
ON OFF
P4B-LS
®
P4B-LS JumperFree™ Mode Setting
SWITCH
Jumper Mode
1
2
ON 123456789
1
0
JEN
Jumper Free
(Default)
2
3
OFF